Search Knowledge Base Articles

What is "HSPI_MISO"?

"HSPI_MISO" is a signal on some microcontrollers that is used as the input for data transmitted from the slave devices in High-Speed Serial Peripheral Interface (HSPI) communication.

In an HSPI setup, the HSPI_MISO signal is typically connected to the "MISO" (Master In Slave Out) pin of the slave device, which transmits data to the master device. The master device reads the data from the HSPI_MISO line and processes it accordingly.

The specific characteristics of the HSPI_MISO signal, such as its voltage level, timing, and frequency, can vary depending on the specific microcontroller being used and the configuration of the HSPI interface. It is important to consult the datasheet and documentation for the specific microcontroller being used to understand the characteristics of the HSPI_MISO signal and how it should be used in a particular application.

HSPI is a variant of the Serial Peripheral Interface (SPI) communication protocol that is designed to support higher speeds, typically up to several megabits per second. HSPI is used in many applications, including wireless communication, video displays, and high-speed data acquisition.

Did you find this article useful?


Related Articles

  • What is "SCL"?

    "SCL" stands for "Serial Clock" and it is a signal used in digital communication protocols such as I2C (Inter-Integrated Circuit) and SMBus (System Ma...

  • What is "OTG"?

    "OTG" stands for "On-The-Go" and it is a specification for USB (Universal Serial Bus) devices that allows them to act as either a host or a peripheral...

  • What is "FEL"?

    "FEL" stands for "Force Entry into Bootloader" and it is a method used to enter the bootloader mode of certain electronic devices, such as Android dev...

  • What is "CSI"?

    "CSI" can refer to multiple things in the context of an electronic circuit, but most commonly it stands for "Camera Serial Interface."The Camera Seria...

  • What is "VCC"?

    "VCC" stands for "Voltage at the Common Collector" and it is a term used in electronic circuits to refer to the power supply voltage that is applied t...